|
|
@@ -283,6 +283,15 @@ tun:
|
|
|
# If using massive routes updates, for example BGP, you may need to increase this value to avoid packet loss.
|
|
|
# SO_RCVBUFFORCE is used to avoid having to raise the system wide max
|
|
|
#use_system_route_table_buffer_size: 0
|
|
|
+ #
|
|
|
+ # When using the feature to carry IPv4 unsafe_routes through a IPv6-only overlay network (4over6),
|
|
|
+ # the system still needs to use IPv4 addresses to pass that traffic.
|
|
|
+ # By default, they are randomly chosen out of 169.254.0.0/16 at startup, but if you need them to be static, you can set them here.
|
|
|
+ # Setting these options is not required for use of the 4over6 feature.
|
|
|
+ # this is the address that a client will use as a source IP for packets sent to the router
|
|
|
+ #unsafe_origin_address_for_4over6: 169.254.55.96
|
|
|
+ # this is the IP the router will use internally to hairpin-NAT 4over6 traffic before it hits the operating system.
|
|
|
+ #snat_address_for_4over6: 169.254.12.34
|
|
|
|
|
|
# Configure logging level
|
|
|
logging:
|
JackDoan